Filter
Top Products
SCEPTRE X22 Page17
Connecting the LCD to Your PC
If You Have DVI Connection on Your Video Card…
1. Make sure the power of X22 LCD MONITOR is turned off.
2. Obtain a DVI cable and connect to the DVI connection on your
PC. Connect the other end of the cable to your X22 LCD
MONITOR.
3. Obtain the Audio In cable and connect the 3.5 mm Mini-jack
cable to the Audio In connection of the monitor. Connect the
other end of the 3.5 mm Mini-jack cable to your PC’s audio line
out connection.
4. Turn on the power of both the X22 LCD MONITOR and the PC.
Please Note :
• Some video cards may have their DVI connection turned
off by default. If you do not get video, please consult your
video card’s technical support.
• The PC’s clearest picture is produced under 1680x1050
at 60Hz.