Seagate 100516226 Computer Drive User Manual


 
CHEETAH 15K.7 SAS PRODUCT MANUAL, REV. F 4
Australian C-Tick
If this model has the C-Tick Marking it complies with the Australia/New Zealand Standard AS/NZS3548 1995 and meets the
Electromagnetic Compatibility (EMC) Framework requirements of Australia’s Spectrum Management Agency (SMA).
Korean KCC
If this model has the Korean Communications Commission (KCC) logo, it complies with paragraph 1 of Article 11 of the
Electromagnetic Compatibility (EMC) Control Regulation and meets the Electromagnetic Compatibility Framework
requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea
Taiwanese BSMI
If this model has two Chinese words meaning “EMC certification” followed by an eight digit identification number, as a
Marking, it complies with Chinese National Standard (CNS) 13438 and meets the Electromagnetic Compatibility (EMC)
Framework requirements of the Taiwanese Bureau of Standards, Metrology, and Inspection (BSMI).
2.3 EUROPEAN UNION RESTRICTION OF HAZARDOUS SUBSTANCES (ROHS)
The European Union Restriction of Hazardous Substances (RoHS) Directive restricts the presence of chemical substances,
including Lead (Pb), in electronic products effective July 2006.
A number of parts and materials in Seagate products are procured from external suppliers. We rely on the representations of
our suppliers regarding the presence of RoHS substances in these parts and materials. Our supplier contracts require
compliance with our chemical substance restrictions, and our suppliers document their compliance with our requirements by
providing material content declarations for all parts and materials for the disk drives documented in this publication. Current
supplier declarations include disclosure of the inclusion of any RoHS-regulated substance in such parts or materials.
Seagate also has internal systems in place to ensure ongoing compliance with the RoHS Directive and all laws and
regulations which restrict chemical content in electronic products. These systems include standard operating procedures that
ensure that restricted substances are not utilized in our manufacturing operations, laboratory analytical validation testing,
and an internal auditing process to ensure that all standard operating procedures are complied with.
2.4 REFERENCE DOCUMENTS
SCSI Commands Reference ManualSeagate part number: 100293068
SAS Interface Manual Seagate part number: 100293071
ANSI SAS documents
SFF-83233.5” Drive Form Factor with Serial Connector
SFF-8460HSS Backplane Design Guidelines
SFF-8470Multi Lane Copper Connector
SFF-8482SAS Plug Connector
ANSI INCITS.xxx Serial Attached SCSI (SAS-2) Standard (T10/1562-D)
ISO/IEC 14776-xxxSCSI Architecure Model-4 (SAM-4) Standard (T10/1561-D)
ISO/IEC 14776-xxxSCSI Primary Commands-3 (SPC-3) Standard (T10/1416-D)
ISO/IEC 14776-xxxSCSI Block Commands-2 (SBC-2) Standard (T10/1417-D)
Trusted Computing Group (TCG) Documents (apply to SED models only)
TCG Core Specification, version 0.9
TCG SSC Specification (draft)
Self-Encrypting Drives Users Guide‘Seagate part number: 100515636
Specification for Acoustic Test Requirement and ProceduresSeagate part number: 30553-001
Package Test Specification Seagate P/N 30190-001 (under 100 lb.)
Package Test Specification Seagate P/N 30191-001 (over 100 lb.)
In case of conflict between this document and any referenced document, this document takes precedence.