Filter
Top Products
12 Pipeline HD SATA Product Manual, Rev. F
Drive Specifications www.seagate.com
*One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending
on operating environment and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power
to operational levels
Standby to ready (max)
<17s <6s
Track-to-track seek time (typical)
<1.0ms read;
<1.2ms write
<1.0ms read;
<1.2ms write
Average seek (typical)
<8.5ms read;
<9ms write
<8.5ms read;
<9ms write
Startup current (typical) 12V (peak)
2.0A 2.0A
Voltage tolerance
(including noise)
5V: ± 5%
12V: ±10%
5V: ± 5%
12V: ±10%
Operating temperature (drive case temperature)
0° to 75°C
Nonoperating temperature (ambient)
–40° to 70°C
Temperature gradient (max)
20°C per hour (operating)
30°C per hour (nonoperating)
Relative humidity
5% to 95% (operating)
5% to 95% (nonoperating)
Relative humidity gradient (max)
30% per hour 30% per hour
Wet bulb temperature (max)
37.7°C (operating)
40.0°C (nonoperating)
Altitude, operating
–60.96m to 3048m
(–200 ft. to 10,000+ ft.)
–60.96m to 3048m
(–200 to 10,000+ ft.)
Altitude, nonoperating
(below mean sea level, max)
–60.96m to 12,192m
(–200 ft. to 40,000+ ft.)
–60.96m to 12,192m
(–200 ft. to 40,000+ ft.)
Operational Shock (max)
80 Gs at 2ms 80 Gs at 2ms
Nonoperational Shock (max)
300 Gs at 2ms 350 Gs at 2ms
Vibration, operating
2Hz–22Hz: 0.25 Gs,
Limited displacement
22Hz–350Hz: 0.50 Gs
350Hz–500Hz: 0.25 Gs
2Hz–22Hz: 0.25 Gs,
Limited displacement
22Hz–350Hz: 0.50 Gs
350Hz–500Hz: 0.25 Gs
Vibration, nonoperating
5Hz–22Hz: 3.0 Gs
22Hz–350Hz: 3.0 Gs
350Hz–500Hz: 3.0 Gs
5Hz–22Hz: 3.0 Gs
22Hz–350Hz: 3.0 Gs
350Hz–500Hz: 3.0 Gs
Drive acoustics, sound power
Idle**
2.1 bels (typical)
2.3 bels (max)
1.9 bels (typical)
2.1 bels (max)
Seek
2.3 bels (typical)
2.4 bels (max)
2.2 bels (typical)
2.3 bels (max)
Nonrecoverable read errors
1 per 10
14
bits read 1 per 10
14
bits read
Annualized Failure Rate (AFR)
0.55% 0.55%
Warranty
To determine the warranty for a specific drive, use a web
browser to access the following web page:
support.seagate.com/customer/warranty_validation.jsp
From this page, click on the “Verify Your Warranty” link. You will
be asked to provide the drive serial number, model number (or
part number) and country of purchase. The system will display
the warranty information for your drive Preventative
maintenance: none required.
Load/Unload cycles
300K at 25°C, 50% rel. humidity
Supports Hotplug operation per the Serial ATA Revision
3.0 specification
Yes
Table 1 Drive specifications summary for 2TB and 1TB models (continued)
Drive Specification ST2000VM003 ST1000VM002