Filter
Top Products
-7-
1.4 Specifications
Copper Ports w/h PSE (P2-P5)
Compliance IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Connectors Shielded RJ-45 jacks
Pin assignments Auto MDI/MDI-X detection
Configuration Auto-negotiation
Transmission rate 10Mbps, 100Mbps
Duplex support Full/Half duplex
Network cable Cat.5 UTP
Power over Ethernet IEEE 802.3af-compliant PSE (function equipped in PoE Model only)
Combo Port (P1)
Compliance IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX/100Base-FX
Interface Selection Fiber is selected if an SFP fiber transceiver is installed in SFP slot
Copper Interface
Connector Shielded RJ-45 jack
Pin assignments Auto MDI/MDI-X detection
Configuration Auto-negotiation or software control
Transmission rate 10Mbps, 100Mbps
Duplex support Full/Half duplex
Network cable Cat.5 UTP
Fiber Interface
Connector SFP slot for optional SFP type fiber transceivers
Configuration 100Mbps, Full duplex
Far End Fault Support Enabled
Network cables MMF 50/125 60/125, SMF 9/125
Eye safety IEC 825 compliant
Switch Functions
MAC Addresses Table 1K entries
Forwarding & filtering Non-blocking, full wire speed
Switching technology Store and forward
Maximum packet length 1536 bytes
Flow control IEEE 802.3x pause frame base for full duplex operation
Back pressure for half duplex operation
Broadcast Storm Protection design