Filter
Top Products
CONSTELLATION ES.3 SAS PRODUCT MANUAL, REV. B 6
3.0 GENERAL DESCRIPTION
Constellation ES.3 drives provide high performance, high capacity data storage for a variety of systems including engineering
workstations, network servers, mainframes, and supercomputers. The Serial Attached SCSI interface is designed to meet next-generation
computing demands for performance, scalability, flexibility and high-density storage requirements.
Constellation ES.3 drives are random access storage devices designed to support the Serial Attached SCSI Protocol as described in the
ANSI specifications, this document, and the SAS Interface Manual (part number 100293071) which describes the general interface
characteristics of this drive. Constellation ES.3 drives are classified as intelligent peripherals and provide level 2 conformance (highest
level) with the ANSI SCSI-1 standard. The SAS connectors, cables and electrical interface are compatible with Serial ATA (SATA),
giving future users the choice of populating their systems with either SAS or SATA hard disk drives. This allows you to continue to
leverage your existing investment in SCSI while gaining a 6Gb/s serial data transfer rate.
The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for “Security of Data at Rest” based on
the standards defined by the Trusted Computing Group
(see www.trustedcomputinggroup.org).
The head and disk assembly (HDA) is sealed at the factory. Air recirculates within the HDA through a non-replaceable filter to maintain
a contamination-free HDA environment.
Constellation ES.3 drives use a dedicated load/unload zone at the outermost radius of the media to eliminate the possibility of destroying
or degrading data by landing in the data zone. The heads automatically go to the ramp load/unload when power is removed from the
drive.
An automatic shipping lock prevents potential damage to the heads and discs that results from movement during shipping and handling.
The shipping lock disengages and the head load process begins when power is applied to the drive.
Constellation ES.3 drives decode track 0 location data from the servo data embedded on each surface to eliminate mechanical transducer
adjustments and related reliability concerns.
The drives also use a high-performance actuator assembly with a low-inertia, balanced, patented, straight arm design that provides
excellent performance with minimal power dissipation.
NOTE
Never disassemble the HDA and do not attempt to service items in the sealed
enclosure (heads, media, actuator, etc.) as this requires special facilities. The drive
does not contain user-replaceable parts. Opening the HDA for any reason voids your
warranty.
NOTE
Seagate recommends validating your configuration with the selected HBA/RAID
controller manufacturer to ensure full 3TB and 4TB capacity capabilities.