Filter
Top Products
12 SV35 Series SATA Product Manual, Rev. C
Drive Specifications www.seagate.com
*One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending
on operating environment and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
*** All specifications above are based on native configurations.
Startup current (typical) 12V
(peak)
2.0A 2.0A 2.0A
Voltage tolerance (including
noise)
5V: ±5%
12V: +10% / -7.5%
5V: ±5%
12V: +10% / -7.5%
5V: ±5%
12V: +10% / -7.5%
Ambient temperature 0° to 70°C (operating)
–40° to 70°C (non-operating)
0° to 70°C (operating)
–40° to 70°C (non-operating)
0° to 70°C (operating)
–40° to 70°C (non-operating)
Temperature gradient 20°C per hour max (operating)
30°C per hour max (non
operating)
20°C per hour max (operating)
30°C per hour max (non-
operating)
20°C per hour (operating)
30°C per hour (non operating)
Relative humidity 5% to 95% (operating)
5% to 95% (non-operating)
5% to 95% (operating)
5% to 95% (non-operating)
5% to 95% (operating)
5% to 95% (non-operating)
Relative humidity gradient
(max)
30% per hour 30% per hour 30% per hour
Wet bulb temperature (max) 37.7°C max (operating)
40.0°C max (non-operating)
37.7°C (operating)
40.0°C (non-operating)
37.7°C max (operating)
40.0°C max (non-operating)
Altitude, operating –304.8m to 3048m
(–1000 ft to 10,000+ ft)
–304.8m to 3048m
(–1000 ft to 10,000+ ft)
–304.8m to 3048m
(–1000 ft to 10,000+ ft)
Altitude, non-operating
(below mean sea level, max)
–304.8m to 12,192m
(–1000 ft to 40,000+ ft)
–304.8m to 12,192m
(–1000 ft to 40,000+ ft)
–304.8m to 12,192m
(–1000 ft to 40,000+ ft)
Operational Shock (max) 80 Gs at 2ms 80 Gs at 2ms 80 Gs at 2ms
Non-Operational Shock (max) 300 Gs at 2ms 300 Gs at 2ms 350 Gs at 2ms
Vibration, operating
2Hz to 22Hz: 0.25 Gs
(Limited displacement)
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
2Hz to 22Hz: 0.25 Gs
(Limited displacement)
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
2Hz to 22Hz: 0.25 Gs
(Limited displacement)
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
Vibration, non-operating 5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
Drive acoustics, sound power
Idle** 2.4 bels (typical)
2.6 bels (max)
2.4 bels (typical)
2.6 bels (max)
2.2 bels (typical)
2.3 bels (max)
Seek 2.6 bels (typical)
2.7 bels (max)
2.6 bels (typical)
2.7 bels (max)
2.3 bels (typical)
2.4 bels (max)
Non-recoverable read errors 1 per 10
14
bits read 1 per 10
14
bits read 1 per 10
14
bits read
Annualized Failure Rate (AFR) <1% <1% <1%
Warranty To determine the warranty for a specific drive, use a web browser to access the following web page:
support.seagate.com/customer/warranty_validation.jsp
From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial
number, model number (or part number) and country of purchase. The system will display the warranty
information for your drive.
Load/Unload cycles (25°C,
50% rel. humidity)
300,000 300,000 300,000
Supports Hotplug operation
per the Serial ATA Revision 3.0
specification
Yes Yes Yes
Table 1 Drive specifications summary for 3TB, 2TB and 1TB models (continued)
Drive Specification ST3000VX000 ST2000VX000 ST1000VX000