Filter
Top Products
Pulsar XT.2 SAS Product Manual, Rev. B 55
11.4 Miscellaneous operating features and conditions
Table 19 lists various features and conditions. A “Y” in the support column indicates the feature or condition is
supported. An “N” in the support column indicates the feature or condition is not supported.
11.4.1 SAS physical interface
Figure 14 shows the location of the SAS device connector J1. Figures 15 and 16 provide the dimensions of the
SAS connector.
Details of the physical, electrical, and logical characteristics are provided within this section. The operational
aspects of Seagate’s SAS drives are provided in the SAS Interface Manual.
Figure 14. Physical interface
Table 19: Miscellaneous features
Supported Feature or condition
N
Automatic contingent allegiance
N
Asynchronous event notification
Y
Segmented caching
N
Zero latency read
Y
Queue tagging (up to 128 queue tags supported)
Y
Deferred error handling
Y
Parameter rounding (controlled by Round bit in MODE SELECT page 0)
Y
Reporting actual retry count in Extended Sense bytes 15, 16, and 17
Table 20: Miscellaneous status
Supported Status
Y
Good
Y
Check condition
Y
Condition met/good
Y
Busy
Y
Reservation conflict
Y
Task set full
N
ACA active
N
ACA active, faulted initiator
N
Task Aborted