Filter
Top Products
2 Barracuda 9 Installation Guide, Rev. B
• Turn off the power before removing or installing the DC power
cable.
• Do not remove any circuit boards from the drive.
• Never use an ohmmeter on any circuit boards.
• When installing the drive on a carrier or tray, discharge the car-
rier or tray prior to inserting it into the system.
Important safety information and precautions
Caution.
Use forced-air ventilation when bench-testing the
drive to ensure proper cooling of drive components.
Use proper safety and repair techniques for safe, reliable opera-
tion of this unit. Service should be done only by qualified per-
sons. We recommend the procedures in this manual as effective
ways of servicing the unit. Some procedures require the use of
special tools. For proper maintenance and safety, you must use
these tools as recommended.
The procedures in this manual and labels on the unit contain
warnings and cautions that must be carefully read and followed
to minimize or eliminate the risk of personal injury. The warnings
point out conditions or practices that may endanger you or oth-
ers. The cautions point out conditions or practices that may dam-
age the unit, possibly making it unsafe for use.
These warnings and cautions are not exhaustive. We cannot
possibly know, evaluate, and advise you of all the ways in which
maintenance might be performed or the possible risk of each
technique. Consequently, we have not completed any such
broad evaluation. If you use a non-approved procedure or tool,
first ensure that the method you choose will not risk either your
safety or unit performance.