Filter
Top Products
Hawk 2LP Family Installation Guide, Rev. B 25
_____________________________________________________________________________________________________________
Notes for Figure 3a and 3b:
[1] Notes explaining the functions of the various jumpers
on jumper header connectors J2, J5 and J6 are given
below in left to right order of jumper position. The term
"default" means as standard OEM units are configured
when shipped from factory. "Off" means no jumper is
installed; "On" means a jumper is installed. Off or On
underlined is factory default condition.
Suggested part number for the unusual J2 jumper is
Molex 52747-0211 (Seagate P/N 77679052).
[2] "ND" models do not have terminators on the drive PCB,
so these jumpers are not applicable.