Filter
Top Products
DB35.2 Serial ATA Product Manual, Rev. B 7
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Altitude, nonoperating
(meters below mean sea level, max)
–60.96 m to 12,192 m
(–200 ft to 40,000+ ft)
Shock, operating (max at 2 msec) 63 Gs
Shock, nonoperating (max at 2 msec) 350 Gs
Vibration, operating 5-22 Hz: +/-0.25”, Displacement limited
22-350 Hz: 0.5 Gs
350-500 Hz: 0.25 Gs
Vibration, nonoperating 5-22 Hz: +/-0.25”, Displacement limited
22-350 Hz: 5.0 Gs
350-500 Hz: 1.0 Gs
Drive acoustics, sound power (bels)
Idle** (bels) 2.67 (typical)
2.82 (max)
Operational, CE seeks (bels) 2.80 (typical)
2.90 (max)
Operational, PVR seeks (bels) 2.68 (typical)
2.80 (max)
Nonrecoverable read errors 1 per 10
14
bits read
Annualized Failure Rate (AFR) 0.70%
Warranty 5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to access
the following web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will be asked
to provide the drive serial number, model number (or part number) and
country of purchase. The system will display the warranty information for
your drive.
Contact start-stop cycles
(25°C, 50% relative humidity)
50,000
Supports hotplug operation per Serial ATA Revision 2.5
specification
Yes
Table 2: Drive specifications for 300, 250 and 200 Gbyte models
Drive specification ST3300822SCE ST3250824SCE ST3200827SCE