Filter
Top Products
Savvio 10K.2 SAS Product Manual, Rev. D
27
6.2.1 Conducted noise immunity
Noise is specified as a periodic and random distribution of frequencies covering a band from DC to 10 MHz.
Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power
connector.
6.2.2 Power sequencing
The drive does not require power sequencing. The drive protects against inadvertent writing during power-up
and down.
6.2.3 Current profiles
The +12V and +5V current profiles for the ST9146802SS and ST973402SS models are shown below.
Figure 2. ST9146802SS current profile
+5v = 250 mV pp from 0 to 100 kHz to 20 MHz.
+12v = 800 mV pp from 100 Hz to 8 KHz.
450 mV pp from 8 KHz to 20 KHz.
250 mV pp from 20 KHz to 5 MHz.