Filter
Top Products
28 Pulsar Product Manual, Rev. A
64 Advanced PIO modes supported. SATA = 0003h 0003
H
65 Minimum Multiword DMA transfer cycle time per word (120ns) 0078
H
66 Recommended Multiword DMA transfer cycle time (120ns) 0078
H
67 Minimum PIO transfer cycle time without flow control (120ns) 0078
H
68 Minimum PIO transfer cycle time with IORDY flow control (120ns) 0078
H
69 Additional Features and Commands supported.
Trim Features supported, DMA commands supported
4000
H
70 Reserved 0000
H
71–74 Reserved for ATAPI 0000
H
75 Queue depth 001F
H
76 Serial ATA Capabilities Supported 0706
H
77 Reserved for Serial ATA 0000
H
78 Serial ATA features supported 004C
H
79 Serial ATA features enabled 0040
H
80 Major version number 01FC
H
81 Minor version number 0028
H
82 Commands and feature sets supported 746B
H
83 Commands and feature sets supported 7501
H
84 Commands and feature sets supported 6193
H
85 Commands and feature sets supported or enabled 7069
H
86 Commands and feature sets supported or enabled B401
H
87 Commands and feature sets supported or enabled 6163
H
88 Ultra DMA support and current mode (see note following this table) 207F
H
89 Security erase time 0000
H
90 Enhanced security erase time 0000
H
91 Current APM level value 00FE
H
92 Master password Identifier 0000
H
93 Hardware reset result 0000
H
94 Reserved 0000
H
95–99 ATA-reserved 0000
H
100–103 Total Number of User Addressable Logical Blocks for 48-bit com-
mands. These words are required for drives that support the 48-bit
addressing feature. Maximum value: 0000FFFFFFFFFFFFh
200GB model = 390,721,968
100GB model = 195,371,568
50GB model = 97,696,368
104 Reserved for Streaming Command Set 0000
H
105 Maximum number of 512-byte blocks of LBA Range Entries
(see 4.18.3.2) per DATA SET MANAGEMENT command
0001
H
106 Physical sector size / logical sector size 4000
H
107 Inter-seek delay for ISO 7779 standard acoustic testing 0000
H
108–111 World wide name XXXX
H
Word Description Value