Filter
Top Products
Momentus 5400.3 SATA Product Manual, Rev. C
3
2.0 Drive specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal
power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the
ST9160821AS, ST9120822AS, ST9100828AS, ST980811AS, ST960813AS, and ST940814AS models.
2.1 Specification summary table
The specifications listed in this table are for quick reference. For details on specification measurement or defi-
nition, see the appropriate section of this manual.
Table 1: Drive specifications
Drive specification ST9160821AS ST9120822AS ST9100828AS ST980811AS ST960813AS ST940814AS
Formatted Gbytes
(512 bytes/sector)*
160 120 100 80 60 40
Guaranteed sectors 312,581,808 234,441,648 195,371,568 156,301,488 117,210,240 78,340,160
Bytes per sector 512
Physical read/write heads 433221
Discs 222111
Cache (Mbytes) 8
Recording density in BPI
(bits/inch max)
870k
Track density TPI (tracks/inch max) 150k
Areal density (Gbits/inch
2
max) 132
Spindle speed (RPM) 5,400
Internal transfer rate
(Mbits/sec max)
352
I/O data transfer rate
(Mbytes/sec max)
150
ATA data-transfer modes supported SATA 1.0, Serial ATA Revision 2.5
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
Height (max) 9.5 +/- 0.2 mm (0.374 +/- .0078 inches)
Width (max) 69.85 mm (2.75 +/- 0.0098 inches)
Length (max) 100.50 +/- 0.25 mm (3.957 +/- 0.010 inches)
Weight (typical) 100 grams (0.22 lb) 96 grams (0.21 lb)
Average latency (msec) 5.6
Power-on to ready (sec typical) 3.0
Standby to ready (sec typical) 3.0
Track-to-track seek time
(msec typical)
1.0 (read), 1.5 (write)