Seagate ST9500325AS Computer Drive User Manual


 
MOMENTUS 5400.6 SATA PRODUCT MANUAL, REV. G 11
2.6 PHYSICAL CHARACTERISTICS
DRIVE SPECIFICATION
Height (mm)
(inches)
9.5 +/-0.2
0.374 +/-0.0079
Width (mm)
(inches)
69.85 +/-0.25
2.75 +/-0.0098
Length (mm)
(inches)
100.35 +0.20 / -0.25
3.957 +0.0079 / -0.0098
Weight (max)
ST9500325AS
ST9500325ASG
ST9320325AS
ST9320325ASG
ST9250315AS
ST9250315ASG
ST9160314AS
ST9160314ASG
ST9120315AS
ST9120315ASG
ST980313AS
ST980313ASG
98.8 grams
0.218 pounds
93.5 grams
0.206 pounds
2.7 SEEK TIME
Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive
diagnostics. The specifications in the table below are defined as follows:
Track-to-track seek time is an average of all possible single-track seeks in both directions.
Average seek time is a true statistical random average of at least 5000 measurements of seeks between random tracks,
less overhead.
Table 4 Typical seek times
SEEK TIMES (MSEC) READ
Track-to-track (typical) 1
Average (typical) 14
Full-stroke (max) 30
Average latency 5.56
Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks,
regardless of mode (such as track-to-track and average), are expected to meet the noted values. However, due
to the manner in which these drives are formatted, benchmark tests that include command overhead or measure
logical seeks may produce results that vary from these specifications.
2.8 START/STOP TIMES
TIME TO READY TYPICAL MAX @ 25°C
Power-on to Ready (sec) 3.6 3.8
Standby to Ready (sec) 1.8 2