Filter
Top Products
3
Enabling the VPN servers
3-2 Configuring Sidewinder for Soft-PK Clients
Enabling the VPN
servers
Before you configure a VPN association on your Sidewinder, you must
first enable the Sidewinder’s EGD and CMD servers. In addition, you
must enable the ISAKMP server and set it to listen on the Internet
burb.
Do the following from the Sidewinder Cobra interface:
1. Enable the cmd, egd, and isakmp servers.
a. Select Services Configuration -> Servers -> Control.
Figure 3-1. Services
Configuration -> Servers
-> Control
b.
To enable a server, select it from the Server Name list and click
Enable.
c. Click Apply.
2. Configure the ISAKMP server.
a. Select VPN Configuration -> ISAKMP Server.
Figure 3-2. VPN
Configuration -> ISAKMP
Server
b.
In the Burbs to Listen on list column, click the burb name associated
with the Internet burb.
c. In the Available Authentication Method fields, specify the method(s)
to use for Extended Authentication.
d. Click Apply.
Enable these servers (cmd server is
enable by default)