Filter
Top Products
A
Soft-PK Connection Monitor
A-2 Troubleshooting
The following summarizes the tasks you can perform.
Soft-PK
Connection
Monitor
The Connection Monitor displays statistical and diagnostic information
for each active connection in the security policy. This utility is
designed to display the actual security policy settings configured in
Security Policy Editor and the security association (SA) information
established during Phase 1 IKE negotiations and Phase 2 IPSec
negotiations.
To start the Connection Monitor, right-click the Soft-PK icon or select
it from the Start menu.
Figure A-2. Connection
Monitor window
Button Summary
Clear Clears the communications log.
IMPORTANT: You cannot retrieve this information once you
clear it.
Freeze Freezes/Unfreezes the communications log. Because the
communications log scrolls through IKE negotiations as
they occur, you may need to freeze the log in order to save
or print specific messages.
Since this button acts as a toggle, it will now read UnFreeze
until you click it again to restart the log.
Print Print the current content in the communications log.
TIP: You may want to freeze the log before you attempt to
print it.
Save Print the current content in the communications log.
TIP: You may want to freeze the log before you attempt to
save it.
Close Closes the log viewer.