Filter
Top Products
4 . ASSEMBLING AND INSTALLATION
Note that tools such as a phillips-head screwdriver and wrench for M16 hexagon bolt w/24 mm
width across flats are required for the assembly work.
When carrying out the assembly work, follow the procedure in the following 4-item sequence:
ASSY OF CABINET
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
POWER SUPPLY
ASSEMBLING CHECK
Assembling should be performed as per this manual. Since this is a
complex machine, erroneous assembling may cause damage to the
machine, or malfunctioning to occur.
When assembling, be sure to perform work by plural persons.
Depending on the type of work, there are some cases in which a
single person performing the work can cause personal injury or parts
damage.
1
2
3
4
Permanantly tightening the hex bolts should not be completed until
the leg levelers are adjusted properly.
A
ASSY OF CABINET
11