Filter
Top Products
The coin selector should be cleaned
once every 3 months. When cleaning,
follow the procedure below:
Turn the power for the machine OFF.
Open the coin chute door.
Open the gate and dust off by using a
soft brush (made of wool, etc.).
Remove and clean smears by using a
soft cloth that has been dipped in water
or diluted chemical detergent and then
squeezed dry.
Remove the CRADLE.
When removing the retaining ring (E-
ring), be very careful so as not to bend
the shaft.
Remove stains from the shaft and
pillow portions by wiping with a soft
cloth, etc.
After cleaning, apply a dry cloth to dry
the coin selector completely.
Once a month, when performing the COIN SW
TEST, simultaneously check the following:
Does the Coin Meter count satisfactorily?
Does the coin drop into the Cashbox correctly?
Is the coin rejected once inserted when the
REJECT BUTTON is kept pressed down?
If the coin is not rejected when the REJECT BUTTON is pressed, open the coin chute door
and open the selector gate. After removing the jammed coin, put a normal coin in and check
to see that the selector functions correctly.
1
2
3
4
5
6
COIN INSERTION TEST
HANDLING THE COIN JAM
CLEANING THE COIN SELECTOR
11 . COIN SELECTOR
Never apply machine oil, etc. to
the coin selector
After cleaning the Coin Selector,
insert a regular coin during the
normal working status to ensure
that the Selector functions cor-
rectly.
GATE
FIG. 11a
CRADLE
FIG. 11b
Insert a coin
while keeping
the Reject
Button pressed
down and
check if it is
rejected.
COIN METER
FIG. 11c
55