Sennheiser System 2013 PLL Computer Monitor User Manual


 
l1
l2
2.11
Indicator lamps on the receiver EK 2013 PLL
Two LED indicator lamps are located on the front of the unit.
Automatic fade-in, green led
L1 indicates that the acoustic signal is being correctly transmitted. If it lights up, the
automatic fade-in feature is activated. The transmission path has preference over the
surrounding noises transmitted by the built-in microphone.
In addition, L1 also serves as an adjustment aid for the microphone sensitivity at the
Transmitter SK 2013 PLL. (Also see Page 14)
Squelch and battery check, red led
L2 has the dual function squelch indicator (activated squelch) and LowBat
indicator for battery check with tendency recognition:
constant red light Squelch switched on = no reception
flashing red light slow flashing: The battery voltage is dropping!
However, there is still contact.
The RECHARGEABLE or standard
battery pack must be changed in
approx. 15 minutes.
rapid flashing: The battery voltage is no longer
sufficient for operation. ATTENTION:
The receiver is not functioning!
Both indicator lamps are arranged on the front of the receiver so that they can also be
dependably seen over a greater distance by the person equipped with the transmitter.
In this way it is easy to ascertain whether the speech connection exists.