Filter
Top Products
USER SETTINGS
64
12 MARGIN WIDTH
1: 5 mm
2: 10 mm
3: 15 mm
4: 20 mm
• Use this setting to set the
margin width.
13
MEM. FOR
PRINTER
1: 30%
2: 40%
3: 50%
4: 60%
5: 70%
• Use this to change the
proportion of machine memory
used for printer mode.
14
AUTO KEY
REPEAT
1: ON
2: OFF
• Use this setting to select
whether or not holding down a
key causes repeated input of
the key. For keys that normally
cause a set value to increase
when held down (for example,
holding down the [ ] key
( ) or [ ] key ( )), this
program can be used to have
the set value not change when
the key is held down.
15 KEY PRESS TIME
1: NORMAL
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
• Use this setting to select how
long a key must be pressed
for the input to be accepted.
By selecting a longer time,
you can prevent settings from
being changed by the
accidental pressing of a key.
16
KEY TOUCH
SOUND
1: LOW
2: HIGH
3: OFF
• This sets the volume of beep
signals. (p.68)
17
SOUND AT
DEFAULT
1: ON
2: OFF
• Use this to sound a beep
when a base setting is
selected. (p.68)
18
TONER SAVE
MODE
1: ON
2: OFF
• This mode reduces toner
usage by about 10% when
copying. Toner save mode is
effective when the exposure
mode is AUTO or TEXT.
19 AE LEVEL ADJUST
1: SPF/RSPF
(Adjustment to
5 levels is
possible)
2: DOCUMENT
GLASS
(Adjustment to
5 levels is
possible)
• This is used to adjust the
exposure level.
• The automatic exposure level
can be adjusted separately for
the document glass and the
RSPF.
• For the procedure for
adjusting the exposure and
guidelines for numeric values,
see page 28. The factory
default setting for the
exposure level is "center".
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation