Filter
Top Products
39
INITIAL SETTINGS
2
PBX SETTING
Please note that this setting is only available in Germany and France.
The unit is connected to a PBX, you can program it to acess automatically to public line outside PBX.
PBX setting
Use the following procedure to use the PBX settiing function :
1
Press the [MENU] key.
2
Press the [ ] key ( ) or [ ] key ( )
until "4:USER PROGRAM" appears,
and then press the [OK] key.
3
Press the [ ] key ( ) or [ ] key ( )
until "22:PBX SETTING" appears, and
then press the [OK] key.
4
Press the [ ] key ( ) or [ ] key ( )
to select "1:ON" or "2:OFF".
5
Press the [OK] key.
6
Press the [ ] key ( ) or [ ] key ( )
to select "1:FLASH" or "2:ID", and
then press the [OK] key.
7
Press the [ ] key ( ) or [ ] key ( )"1:SET"
or "2:CLEAR", and then press the [OK] key.
8
Press the 10-key pad to enter the ID
CODE and choose a value between
0-999. Then press the [OK] key.
9
9
Press the [CLEAR ALL] key ().
Press the [CLEAR
ALL] key ( ) to exit
1,2,3,
1,2,3,
SP. FUNC
"4:USER PROGRAM"
Selection
"22:PBX SETTING"
Selection
1,2,3,
1,2,3,
SP. FUNC
1,2,3,
1,2,3,
SP. FUNC
1,2,3,
1,2,3,
SP. FUNC
R-key function (only activated when PBX setting
is ON) R-key allows use to dial (or register) PBX
internal numbers : to dial (or register) an
internal number, press [SPEAKER] key prior to
your number. This will add an "R" digit on LCD
display to indicate that this number is internal
and will not be forwarded to the Public Switched
Telephone Network. Please note that the
speaker will not be activated in this case.
1,2,3,
1,2,3,
SP. FUNC
1,2,3,
1,2,3,
SP. FUNC
Note