Making a Copy
56
2 Place the original on the document glass or in the auto document
feeder.
Using the document glass:
Open the document glass cover and place
the original face down on the glass with
the top edge against the document guide.
• Make sure the centre of the original is
aligned with the centre mark on the
document guide, and then close the
cover.
• Note: The document glass is not
suitable for making copies of books or
other bound documents (the surface to
be copied must lie flat on the glass).
Using the auto document feeder:
Adjust the document guide to the width of
your original(s), and then insert the
originals face up into the feeder.
• Up to 20 A4-size sheets can be
inserted at once.
• For detailed information on using the
auto document feeder and the types of
originals that can be used, see pages
65 to 67.
Note: If an original is placed in both the auto document feeder and on the
document glass, the original in the auto document feeder will be copied.
3 The default temporary copy settings are as follows. To change a setting,
see the following section, Selecting Temporary Copy Settings.
• Enlarge/reduce: 100%
• Number of copies: 1
• Quality: TEXT
(Note: The default quality setting can be changed as explained on page
62.)