Sharp AR-162S Copier User Manual


 
16
MAKING COPIES
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with
the AUTO IMAGE key or manually with the PRESET RATIO selector ( ,
) keys and/or the zoom ( , ) keys. The zoom function enables precise
copy ratio selection from 50% to 200% in 1% increments.
Reduction/enlargement/zoom
Automatic
1
Place the original on the original table and close the
platen cover.
2
Press the ORIGINAL SIZE ENTER key until the indicator
for the size of the original on the original table lights up.
This feature will not work when copy paper of non-standard size is
used or the bypass tray is used.
3
Press the AUTO IMAGE key.
The copy ratio will be automatically set.
If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
If the orientation of the original does not correspond to
standard reduction/enlargement ratios for the selected
paper tray, the ORIGINAL SIZE indicator will blink.
Change the orientation of the original.
4
Set the number of copies.
5
Press the START key.
To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE key again.
When copying from an optional SPF with this feature,
the automatic reduction/enlargement mode will be
automatically canceled after copying is complete.