Filter
Top Products
60
OPTIONAL EQUIPMENT
Copying in the sort mode
When copying in the sort mode, the original image will be stored in the copier
memory each time an original is scanned and copying will start after all
originals have been scanned. To copy in the sort mode, an optional SPF
(AR-SP2) is needed.
1
Set the originals face up in the document feeder tray.
●
The original table cannot be used for sort copying.
2
Press the SORT/GROUP ( / ) key to select the
SORT ( ) mode.
3
Ensure that the copy paper size in the paper tray is the
same size as the originals.
●
If an optional paper feed unit is installed, a paper tray with the
corresponding paper size will be automatically selected.
4
Set the number of copies and press the START ( ) key.
●
Copying will start after the originals have been scanned. Up to 30
sheets of originals can be scanned. (If originals are fed continuously
using the stream feeding mode, up to approximately 60 sheets of A4
(8-1/2" x 11") originals can be scanned. However, when copying
originals which require more memory such as photographs, the
number of originals which can be scanned will be less.) When the
memory becomes full of scanned original image data, the ORIGINAL
DATA ( ) indicator will blink.
When the ORIGINAL DATA ( ) indicator blinks, the copier
will stop scanning. To start copying of scanned originals, press the
START ( ) key. To cancel copying, press the CLEAR ( ) or
CLEAR ALL ( ) key.
ELECTRONIC SORTING KIT (AR-EB3)
Electronic sorting kit (AR-EB3)