Filter
Top Products
20
3
Special functions
SPECIAL FUNCTIONS
This chapter describes the special functions of this copier. Use these functions as needed.
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode (page 20)
Reduces toner consumption by approximately 10%.
Power save modes (page 21)
The copier has two power save modes of operation: preheat mode and auto power shut-off
mode.
●
Preheat mode
When the copier enters the preheat mode, the power save ( ) indicator will light up and
other indicators will remain on or off as before. In this condition, the fuser in the copier is
maintained at a lower heat level, thereby saving power. To exit from the preheat mode, press
any key including keys on the operation panel for facsimile or place originals in the SPF.
●
Auto power shut-off mode
When the copier enters the auto power shut-off mode, the power save ( ) indicator will light
up and other indicators will go out. The auto power shut-off mode saves more power than the
preheat mode but requires a longer time before starting copying. To exit from the auto power
shut-off mode, press the print ( ) key or any key on the operation panel for facsimile or
place originals in the SPF. (When the print ( ) key is pressed once to exit the auto power
shut-off mode, copying will not start.)
Auto clear (page 21)
The copier returns to the initial settings a preset amount of time after the last copy is made. This
preset amount of time (auto clear time) can be changed.
Stream feeding mode (page 21)
For description of the stream feeding mode, see page 15.
TONER SAVE MODE
Press the exposure mode selector key to select the manual ( ) mode.