Sharp AR-M205 All in One Printer User Manual


 
33
CONVENIENT COPY FUNCTIONS
3
Using the document glass
1
Place the first original. (p.18)
2
Select the original size. (p.18)
3
Press the [SORT/GROUP] key
( / ) to select the desired mode.
The modes are selected
in the order "SORT"
( ), "GROUP"
( ), "Off".
4
Set the number of copies and other
settings, and then press the [START]
key ( ).
The ORIGINAL DATA indicator ( ) blinks,
and the original is scanned into memory.
5
When the start indicator lights,
replace the original with the next
original, and then press the [START]
key ( ).
Repeat step 5 until all originals have been
scanned into memory.
6
When all originals have been
scanned, and then press the
[READ-END] key ( ).
The copies are delivered to the paper output tray.
Using the SPF/RSPF
1
Place the originals. (p.19)
2
Press the [SORT/GROUP] key
( / ) to select the desired mode.
The modes are selected
in the order
"SORT"( ),
"GROUP" ( ), "Off".
3
Set the number of copies and other
settings, and then press the [START]
key ( ).
The copies are delivered to the paper output tray.
If the memory becomes full
If the memory becomes full while scanning the
originals, the ORIGINAL DATA indicator
( ) will blink, "FUL" will appear in the
display, and the machine will stop copying.
To copy the originals that have been scanned up
to that point, press the
[START] key ( )
.
To clear the data that has been scanned into
memory, press the [CLEAR ALL] key ( ) or the
[CLEAR] key ( ).
If the paper output tray becomes full
When the maximum number of pages (about 250
pages) that can be held in the paper output tray are
output, copying will temporarily stop. When this
happens, promptly remove the copies and press the
[START] key ( ) to resume copying.
Offset function during Sort/Group copy
The offset function shifts the position of each set or group
of copies in the paper output tray for easy separation.
The offset function setting can be changed in the user
programs. (p.45)
To clear the data in memory, press the
[CLEAR] key
()
.
To cancel the Sort/Group copy job, press
the [CLEAR] key
()
.
To cancel Sort or Group mode, press the
[SORT/GROUP] key ( / )
repeatedly until the SORT/GROUP
indicators ( / ) are both off.
DATA
Note
Note
To cancel the Sort/Group copy job, press
the [CLEAR] key
()
.
To cancel Sort or Group mode, press the
[SORT/GROUP] key ( / )
repeatedly until the SORT/GROUP
indicators are ( / ) both off.
Note
DATA
1
1
1
2
1
2
3
1
1
1
2
3
Offset function
When offset function is disabled