Filter
Top Products
Setting Up and Using OpenLCR
41
2. Setting Up
OpenLCR
“C” indicates that
OpenLCR is activated
Using OpenLCR
When you have registered with OpenLCR and downloaded the rate
data to your fax machine, a highlighted “C” will appear in the date
and time display to indicate that the OpenLCR feature is activated.
Each time you make a long distance phone or fax call, the fax
machine will automatically route the call through the least expensive
carrier based on the downloaded rate information.
Don’t unplug the
fax, or the rate
data will be lost!
Caution!
If you unplug the fax machine or an interruption occurs in your power
supply, the rate data will be erased. If this happens, the highlighted
“C” in the display will blink to alert you.
The fax machine will automatically call OpenLCR within the next 24
hours to receive new rate data; however, if you want to use OpenLCR
service before that time, you should download the rate table manually
as explained on page 39.
♦ We recommend that you do not unplug the fax machine on a regular
basis (for example at night or on the weekends), as this will result in
a large number of calls to OpenLCR and a higher phone bill
depending on where you live.
FAX
TEL
A.M.
JAN-19 02:16
all.book Page 41 Friday, July 14, 2000 11:47 AM