Filter
Top Products
Sending a Fax by Automatic Dialling
33
2. Sending
Faxes
Editing and clearing auto-dial numbers
If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1 Press once and once.
2 Press or until the number you wish to edit or clear appears in
the display.
3 Press once.
4 Select EDIT or CLEAR:
EDIT: CLEAR:
• If you selected CLEAR, go to Step 8.
5 If you selected EDIT, make the desired changes to the number.
• Press or to move the cursor to the digit or digits you wish to
change, and then enter the new digit. The new digit will replace the old
digit.
• If you do not wish to change the number, go directly to Step 6.
6 Press
7 Make the desired changes to the name.
• Press or to move the cursor to the letter or letters you wish to
change, and then press the appropriate number key repeatedly until the
desired letter appears (see Step 5 on page 32). The new letter will replace
the old letter.
• If you do not wish to change the name, go directly to Step 8.
FUNCTION
1
2
START/MEMOR
Y
Display:
1=EDIT, 2=CLEAR
<NEW NUMBER>
all.book Page 33 Monday, September 29, 2003 4:57 PM