Sharp LLS201A Computer Monitor User Manual


 
12
E
n
Disassembling the stand
1. Remove the bottom cover.
Push the tabs in towards the center and pull.
Bottom cover
Tabs
2. Remove the back from the front.
Depress the button on the front and slide the back across,
then pull the back up.
Front
Back
Button
Pen writing position
Place the monitor at an angle on a table or other level surface.
1. Hold the ap by the depression on the back of the
monitor and pull the ap up.
Depression
2. Place the monitor where you want to use it.
Caution
Do not exert a large amount of force on the monitor from
above. Doing so may damage the ap.
Horizontal position
Place the monitor on a table or other level surface.
Caution
When using the monitor horizontally, use the horizontal tab
in the upright position.
1. Lift up the two tabs on the back of the monitor.
2. Place the monitor where you want to use it.
Caution
Do not exert a large amount of force on the monitor from
above. Doing so may damage the tabs.
Installation