Filter
Top Products
10
Product description
654
32
1
78
11
11
11
10
9
1. INPUT button............................ To switch between the signal’s input terminals. (Analog signal input
terminal
↔
DVI-D input terminal)
2. MENU button ............................This button is used to pop-up, select and close the OSD (On Screen
Display) Menu.
3. SELECT button ........................ This button is used to select menu options when the OSD Menu is dis-
played.
4.
buttons .............................. When the OSD Menu is displayed:
These buttons are used to increase or decrease the value of a selected
option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness .
5. Power LED................................ This LED is lit green when in use and orange when in power-saving mode.
6. Power button
7. Power terminal
8. Analog signal input terminal...... Use this when connecting to the computer’s analog RGB output terminal.
9. DVI-D input terminal.................. Use this when connecting to the computer’s digital RGB output terminal.
It can be connected to a computer with a DVI-compatible output terminal
(DVI-D24 pin or DVI-I29 pin) and which has SXGA output ability.
(Depending on the computer to be connected, correct display may or may
not be possible.)
In order to connect, it is necessary to purchase a Digital signal
cable.(Model name: NL-C01E)
10.Security lock anchor ................. By connecting a security lock (purchased separately) to the security lock
anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
11.Ventilation openings .................. Note: Never block the ventilation openings as this may lead to overheat-
ing inside the monitor and result in malfunction.