Filter
Top Products
7-33
SYSTEM SETTINGS
Contents
Copy Function Settings
* When a saddle stitch finisher is installed.
Item Factory default setting Page
■ Copy Function Settings
7-65
● Initial Status Settings
7-65
X Colour Mode Full Colour
X Paper Tray Varies depending on the machine
configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output –
● Other Settings 7-66
X Copy Exposure Adjustment
7-66Colour 5
Black & White 5
X Rotation Copy Setting Enabled 7-66
X Add or Change Extra Preset Ratios – 7-66
X Setting a Maximum Number of Copies 999 7-66
X Initial Margin Shift Setting
7-66Side 1 10 mm (1/2")
Side 2 10 mm (1/2")
X Erase Width Adjustment
7-66Edge Clearance Width 10 mm (1/2")
Centre Clearance Width 10 mm (1/2")
X Card Shot Settings
7-66Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
Fit to Page Disabled
X Automatic Saddle Stitch* Enabled 7-66
X Initial Tab Copy Setting 10 mm (1/2") 7-66
X Disabling Deletion of Job Programs Disabled 7-67
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-67
X Disabling of Auto Paper Selection Disabled 7-67
X Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-67
X B/W 600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-67
X B/W Quick Scan from Document Glass Enabled 7-67
● Colour Adjustments 7-68
X Initial Colour Balance Setting Factory default state 7-68
X Auto Colour Calibration – 7-68