Filter
Top Products
13
SPECIFICATIONS
Finisher (large stacker) specifications*
1
*1 Paper pass unit and stand/1x500 sheet paper drawer or stand/2x500 sheet paper drawer are required to connect the finisher (large
stacker) to the machine.
*2 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of
paper, and the storage conditions of the paper.
*3 Up to 100 sheets of non-standard size paper, envelopes, and transparency film (8-1/2" x 11"(A4)) can be loaded.
*4 The maximum number of sheets for stapling assumes a paper weight of 24 lbs. (90 g/m
2
) and includes two cover sheets of 28 lbs.
bond to 140 lbs. index (106 g/m
2
to 256 g/m
2
).
Model
MX-FN11
Paper sizes
12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, envelopes, A3W, A3, B4, A4, A4R, B5, B5R,
A5R, 8K, 16K, 16KR
Paper weight
Thin paper (15 lbs. to 16 lbs. (55
g
/m
2
to 59
g
/m
2
)) plain paper (16 lbs. to 28 lbs. (60
g
/m
2
to 105
g
/m
2
))
heavy paper (28 lbs. bond to 140 lbs. index (106
g
/m
2
to 256
g
/m
2
)) , envelopes (20 lbs. to 24 lbs.
(75
g
/m
2
to 90
g
/m
2
))
Modes
Non-staple, staple
Allowed paper sizes for
offset
11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
A3, B4, A4, A4R, B5, 8K, 16K
Offset distance
1-3/16" (30 mm)
Tray
capacity*
2
Upper tray
Non-stapling*
3
:
1550 sheets (8-1/2" x 11", 5-1/2" x 8-1/2"R, A4,
B5, A5R, 16K)
650 sheets (12" x 18", 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11"R, 7-1/4" x 10-1/2"R, A3W, A3, B4,
A4R, B5R, 8K, 16KR)
Stapling*
4
:
100 sets or 1550 sheets (8-1/2" x 11", A4, B5,
16K)
50 sets or 650 sheets (11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11"R, A3, B4, A4R, 8K)
Lower tray
Non-stapling*
3
:
2450 sheets (8-1/2" x 11", A4, B5, 16K)
1700 sheets (5-1/2" x 8-1/2"R, A5R)
650 sheets (12" x 18", 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11"R, 7-1/4" x 10-1/2", A3W, A3, B4,
A4R, B5R, 8K, 16KR)
Stapling*
4
:
100 sets or 1550 sheets (8-1/2" x 11", A4, B5,
16K)
50 sets or 650 sheets (11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11"R, A3, B4, A4R, 8K)
Power supply
Supplied from the machine
Dimensions
25-25/64" (W) x 25-25/64" (D) x 43-19/64" (H) (645 mm (W) x 645 mm (D) x 1100 mm (H))
(When tray is extended)
Weight
Approx. 99.3 lbs. (45 kg)
Stapler section
Allowed paper sizes for
stapling
11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
A3, B4, A4, A4R, B5, 8K, 16K
(Three stapling positions: one staple at bottom left corner, one staple at top left corner, and two staples.)
Maximum number of
sheets for stapling*
5
50 sheets (8-1/2" x 11", A4, B5, 16K
30 sheets (11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11" A3,
B4, A4R, 8K)
(30 sheets when the sheets are the same width but different lengths.)
Note:
Special media such as transparency film and label sheets cannot be stapled or punched.
mx5001_us_saf.fm 13 ページ ２００８年９月２４日 水曜日 午前９時４５分