Filter
Top Products
7
SPECIFICATIONS
Machine specifications / copier specifications (Continued)
*1 Output tray (Center tray) cannot be used when the finisher or saddle stitch finisher is installed.
*2 Type A connectors are located on the front of the machine and on the right side of the machine at the back (total of two
connectors); however, the connectors cannot be used simultaneously. Only one of the connectors can be used.
Bypass tray
Paper sizes: 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, envelopes, A3W, A3,
B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR (Includes automatic paper size detection
function. Entry of paper sizes up to 11-5/8" x 17" (297 mm x 432 mm) is possible.)
Paper weights:
Thin paper (15 lbs. to 16 lbs. (55 g/m
2
to 59 g/m
2
)), plain paper (16 lbs. to 28 lbs. (60 g/m
2
to
105 g/m
2
)), heavy paper (28 lbs. bond to 140 lbs. index (106 g/m
2
to 256 g/m
2
)),
envelopes (20 lbs. to 24 lbs. (75 g/m
2
to 90 g/m
2
))
Paper capacity: Standard paper 100 sheets
Paper types:
SHARP-recommended plain paper, recycled paper, colored paper, heavy paper, thin paper,
transparency film, envelopes (Monarch, Com-10, DL, C5)
Duplex module
Paper sizes: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"R, A3, B4,
A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR
Paper weight: Plain paper (16 lbs. to 28 lbs. (60 g/m
2
to 105 g/m
2
)), heavy paper (28 lbs. bond to
110 lbs. index (106 g/m
2
to 209 g/m
2
))
Paper types: SHARP-recommended plain paper, recycled paper, colored paper, and heavy paper
Output tray (Center tray)*
1
Output method: Face-down output (12" x 18" and A3W paper can be output to right tray, finisher, or
saddle stitch finisher)
Output capacity: 500 sheets (using SHARP-recommended 8-1/2" x 11" or A4 paper)
(The maximum number of sheets that can be held varies depending on ambient conditions in the
installation location, the type of paper, and the storage conditions of the paper.)
Tray full sensor:Yes
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity:
Type A connector supports USB 2.0 (
Hi
speed)*
2
Compatibility requirements of USB memory
Memory capacity : Max. 32 GB
Disk Format : FAT32 only
Type B connector supports USB 2.0 (Hi speed)
Required power supply
AC 120 V ±10% 60 Hz
Power consumption
MX-4100N/MX4101N: 1.44kW
MX-5001N: 1.92kW
Typical electricity
consumption
MX-4100N: 12.95 kWh/week
MX-4101N: 13.68 kWh/week
MX-5001N: 13.89 kWh/week
Dimensions
MX-4100N:
25-25/64" (W) x 27-3/8" (D) x 37-25/64" (H) (645 mm (W) x 695 mm (D) x 950 mm (H))
MX-4101N/5001N:
25-25/64" (W) x 27-3/8" (D) x 37-51/64" (H) (645 mm (W) x 695 mm (D) x 960 mm (H))
Weight
MX-4100N: Approx. 262.4 lbs. (119 kg)
MX-4101N/5001N:
Approx. 282.2 lbs. (128 kg)
Overall dimensions
39-11/64" (W) x 27-3/8" (D) (995 mm (W) x 695 mm (D)) (when bypass tray is extended)
mx5001_us_saf.fm 7 ページ ２００８年９月２４日 水曜日 午後３時５８分