Filter
Top Products
29
COPY FUNCTIONS
SELECTING THE ORIGINAL SIZE
When you want to change the original size, select "Original Size" on the right menu and press the [OK] key.
Select Inch or AB with the [ ][ ] keys, and select the size with the [ ][ ] keys.
Press the [OK] key. You will return to the base copy screen.
USING THE BYPASS TRAY TO COPY A SPECIAL SIZE
ORIGINAL
Select "Original Size" in the right menu of the base screen of copy mode and press the [OK] key.
Select "Size Input" in the original size selection screen and press the [OK] key to display the size entry (inch)
screen.
Select "X" (width) with the [ ] or [ ] key and enter the width with the [ ] or [ ] key, then do the same for the
length (Y), and press the [OK] key.
REDUCING OR ENLARGING A COPY
Place the original, and press the [ZOOM] key on the operation panel to change to the ratio selection screen.
Specifying a ratio from 25% to 400%: Preset ratios/zoom.
(When the document feeder is being used, the zoom copy ratio range is 25% to 200%.)
Select the ratio with the [ ][ ] keys. You can fine adjust with the [ ][ ] keys (increments of 1%).
Press the [OK] key to enter the ratio.