Filter
Top Products
51
SELECTING A SPECIAL MODE
The procedure for selecting settings for "Adding margins (Margin Shift)" is
explained below as an example. Although the specific settings for each
special mode vary, the general procedure is the same.
1
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
2
Select settings.
(1) Select the [Special Modes]
key.
Select with and press [OK].
(2) Select the [Margin Shift]
key.
Select with and press [OK].
Settings to shift the margin 15 mm
down will be selected.
(3) Select the [Up] key.
Select with and press [OK].
The margin shift position is initially
set to "Up".
To set the margin shift position to
"Right", "Left", or "Down", select
the corresponding key.
(4) Select the number display
for the front side (side 1).
Select with and press [OK].
The side to be scanned must be face up!
OK
BACK
OK
BACK
OK
BACK
OK
BACK
(2)
(3)
(1)
(4)
mxc381_ex_qck.book 51 ページ ２００８年１０月１６日 木曜日 午後２時３９分