Filter
Top Products
46
SPECIFICATIONS
Machine specifications / copier specifications (Continued)
*1 Output tray (Centre tray) cannot be used when the finisher or saddle stitch finisher is installed.
*2 Type A connectors are located on the front of the machine and on the right side of the machine at the back (total of two
connectors).
Do not use the connectors simultaneously.
When a keyboard is not connected (MX-KBX2), only one connector can be used; simultaneous use is not possible. If you need to
change the connector that is used, contact your service technician.
To receive power supplied from a type A connector, the total current consumption of the connected device should not exceed
500 mA.
Bypass tray
Paper sizes: A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12" x 18", 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR (Includes automatic paper size
detection function. Entry of paper sizes up to 297 mm x 432 mm (11-5/8" x 17") is
possible.)
Paper weights:
Thin paper (56 g/m
2
to 59 g/m
2
(15 lbs. to 16 lbs.)), plain paper (60 g/m
2
to 105 g/m
2
(16 lbs. to
28 lbs.)), heavy paper (106 g/m
2
to 209 g/m
2
(28 lbs. bond to 110 lbs. index)),
envelopes (75 g/m
2
to 90 g/m
2
(20 lbs. to 24 lbs.))
Paper capacity: Standard paper 100 sheets
Paper types:
SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper, thin paper,
transparency film, labels, tab paper, envelopes (Monarch, Com-10, DL, C5)
Duplex module
Paper sizes: A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR
Paper weight: Plain paper (60 g/m
2
to 105 g/m
2
(16 lbs. to 28 lbs.)), heavy paper (106 g/m
2
to
209 g/m
2
(28 lbs. bond to 110 lbs. index))
Paper types: SHARP-recommended plain paper, recycled paper, coloured paper, and heavy paper
Output tray (Centre tray)*
1
Output method: Face-down output (A3W and 12" x 18" paper can be output to right tray, finisher, or
saddle stitch finisher)
Output capacity: 400 sheets (using SHARP-recommended A4 or 8-1/2" x 11" paper)
(The maximum number of sheets that can be held varies depending on ambient conditions in the
installation location, the type of paper, and the storage conditions of the paper.)
Tray full sensor:Yes
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity:
Type A connector supports USB 2.0*
2
Compatibility requirements of USB memory
Memory capacity: Max. 32 GB
Disk Format : FAT32 only
Type B connector supports USB 2.0 (Hi speed)
Required power supply
Local voltage ±10% (For the power supply requirements, see the name plate in the lower corner of
the left side of the machine.)
Power consumption
1.84 kW (220-240 V) / 1.44 kW (100-127 V)
Dimensions
645 mm (W) x 695 mm (D) x 953 mm (H) (25-25/64" (W) x 27-3/8" (D) x 37-33/64" (H)) (With the
reversing single pass feeder installed)
645 mm (W) x 695 mm (D) x 833 mm (H) (25-25/64" (W) x 27-3/8" (D) x 32-51/64" (H)) (With the
document cover installed)
Weight
Approx. 95 k
g
(209.4 lbs.) (With the reversing single pass feeder installed)
Approx. 88 k
g
(194.0 lbs.) (With the document cover installed)
Overall dimensions
986
mm (W) x
695
mm (D) (
38-53/64
" (W) x
27-3/8
" (D)) (when bypass tray is extended)