Filter
Top Products
1-40
BEFORE USING THE MACHINE
Contents
This section describes the peripheral devices that can be used with the machine and explains how to use the finisher, as
well as Sharp OSA (application communication module and external account module).
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard
equipment.
(As of March, 2012)
PERIPHERAL DEVICES
Product name Product number Description
Document cover MX-VR11 This holds down the original.
Reversing single pass feeder
(Automatic document feeder)
MX-RP15
This automatically turns the original over to enable scanning of
both sides.
Stand/500 sheet paper drawer MX-DE17 Additional tray. A maximum 500 sheets of paper can be loaded.
Stand/2x500 sheet paper drawer MX-DE18
Additional tray. A maximum 500 sheets of paper can be loaded
in each tray.
Low stand MX-DS16
These are stands on which the machine is set.
High stand MX-DS17
JOB SEPARATOR MX-TR11
This enables separation of output locations by mode (copy,
printer, etc.).
Exit tray unit
(Right tray)
MX-TE10
When a finisher is installed, this can be added to the right side of
the machine.
Finisher MX-FN23
Output device that enables the use of the staple function and
offset function.
Printer expansion kit MX-PB15
Adds a PCL6 printer function. To install this kit, the hard disk
drive is required.
Network scanner expansion kit MX-NSX1 Adds a network scanner function.
Barcode font kit MX-PF10 Adds barcode fonts to the machine.
PS3 expansion kit MX-PK11
Enables the machine to be used as a Postscript compatible
printer.
Internet fax expansion kit MX-FWX1 Enables Internet Fax.
Facsimile expansion kit MX-FX11 Adds a fax function.
Application integration module MX-AMX1
The application integration module can be combined with the
network scanner function to append a metadata file to a scanned
image file.
Application communication module MX-AMX2
This allows the machine to be linked over a network to an
external software application.
External account module MX-AMX3
This is required to use an external account application on the
machine.