Filter
Top Products
1-42
BEFORE USING THE MACHINE
Contents
This section describes the peripheral devices that can be used with the machine and explains how to use the finisher and
saddle stitch finisher, as well as Sharp OSA (application communication module and external account module).
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard
equipment.
(As of June, 2010)
PERIPHERAL DEVICES
Product name Product number Description
Document cover MX-VRX1 This holds down the original.
Reversing single pass feeder
(Automatic document feeder)
MX-RP11
This automatically turns the original over to enable scanning of
both sides.
Plasmacluster ion generator MX-PC11
This is used to decompose and remove bacterium, viruses, etc.
floating on air.
Plasmacluster ion generator
mounting kit
MX-XB13 Required when a plasmacluster ion generator is installed.
Stand/1x500 sheet paper drawer MX-DEX8
Additional tray. A maximum 500 sheets of paper can be loaded
in each tray.
Stand/2x500 sheet paper drawer MX-DEX9
Large capacity tray MX-LCX1
Additional tray. A maximum of 3500 sheets of paper can be
loaded in the tray.
To install the tray, a stand/1 x 500 sheet paper drawer or stand/2
x 500 sheet paper drawer is required.
Exit tray unit
(Right tray)
MX-TRX2 This can be added to the right side of the machine.
Finisher MX-FNX9
Output device that enables the use of the staple function and
offset function.
Punch module
MX-PNX1A
MX-PNX1B
MX-PNX1C
MX-PNX1D
Punches holes in copies and other output. Requires a finisher.
Finisher (large stacker) MX-FN11
Output device that enables the use of the staple function and
offset function.
To install the finisher (large stacker), a stand/1 x 500 sheet paper
drawer or stand/2 x 500 sheet paper drawer is required.
Punch module
MX-PNX6A
MX-PNX6B
MX-PNX6C
MX-PNX6D
Punches holes in copies and other output. Requires a finisher
(large stacker).
Saddle stitch finisher MX-FN10
Output device that enables use of the staple function, offset
function and pamphlet copy function.
To install the saddle stitch finisher, a stand/1 x 500 sheet paper
drawer or stand/2 x 500 sheet paper drawer is required.
Paper pass unit MX-RBX3
Required when a finisher (large stacker) / saddle stitch finisher is
installed.