Filter
Top Products
5
CAUTIONS
Handling precautions
WARNING
Do not place a container of water or other liquid,
or a metal object that might fall inside, on the
machine.
If the liquid spills or the object
falls into the machine, fire or
electrical shock may result.
If you notice smoke, a strange odor, or other
abnormality, do not use the machine.
If used in this condition, fire or
electrical shock may result.
Immediately switch off the main
power and remove the power
plug from the power outlet.
Contact your dealer or nearest
SHARP Service Department.
Do not use a flammable spray to clean the
machine.
If gas from the spray comes in contact with hot
electrical components or the fusing unit inside the
machine, fire or electrical shock may result.
Do not remove the machine casing.
High-voltage parts inside the machine may cause
electrical shock.
Do not make any modifications to this machine.
Doing so may result in personal injury or damage to
the machine.
If a thunder storm begins, switch off the main
power and remove the power plug from the
outlet to prevent electrical shock and fire due to
lightning.
If a piece of metal or water enters the machine,
switch off the main power and remove the
power plug from the power outlet.
Contact your dealer or nearest SHARP Service
Department. Using the machine in this condition
may result in electrical shock or fire.
Fusing
unit
Paper
exit area
CAUTION
Blocking the ventilation ports will cause heat to build
up in the machine, creating a risk of fire.
The machine includes the document filing function, which stores document image data on the machine's hard drive. Stored
documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer be possible to call
up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the
originals of important documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the
loss of stored document data.
Do not block the ventilation ports on the
machine. Do not install the machine in a
location that will block the ventilation ports.
The fusing unit and paper
exit area are hot. When
removing a misfeed, do not
touch the fusing unit and
paper exit area. Take care
not to burn yourself.
Doing so may damage your
eyes.
Do not look directly at the light source.
When loading paper, removing a misfeed,
performing maintenance, closing the front and
side covers, and inserting and removing trays,
take care that your fingers are not pinched.