Filter
Top Products
E-29
Air Filter Maintenance
• The air filter should be cleaned every 100 hours of use. Clean the filter more
often when the projector is used in a dusty or smoky location.
• Have your nearest Authorized Sharp Industrial LCD Products Dealer or Ser-
vice Center exchange the filter (PFILD0080CEZZ) when it is no longer pos-
sible to clean it.
Cleaning and Replacing the Filter
4 6
Insert the tab on the end of the
filter cover into the filter cover
opening and press the filter
cover into position.
Place the filter underneath the
tabs on the filter frame.
Return the air filter to its original
position in the filter cover
opening.
Clean the dust off the air filter
and cover with a vacuum
cleaner extension hose.
Clean the AIR FILTER.
5
Replace the AIR FILTER.
Replace
the FILTER COVER.
1 3
Turn OFF
the MAIN POWER.
2
Remove
the FILTER COVER.
Remove
the AIR FILTER.
Grasp the air filter between your
fingers and lift it out of the filter
cover.
Press the tab in the direction of
the arrow and lift open the filter
cover.
Tab
Open
POWER indicator goes off.
Unplug the power cord.
AIR FILTER cover
Note:
• Be sure the AIR FILTER COVER is securely installed. The power cannot be turned on unless it is correctly installed.
Press
ONOFF
Bottom Air Filter