Filter
Top Products
17
Quick Start
1 Adjusting the focus.
2
Adjusting the height.
3 Adjusting the picture size.
4. Adjust the projected image
BP. 27
Correcting trapezoidal distortion using Keystone Correction.
On the projector
On the remote control
Shrinks
upper side.
Shrinks
lower side.
5. Correct trapezoidal distortion
BP. 28
Select the “COMPUTER1” using INPUT on the projector or COMPUTER1 on the remote
control.
On the
projector
On the remote
control
INPUT list
INPUT
COMPUTER1
COMPUTER2
HDMI
H
1
2
On-screen display (RGB)
RGB
1024 × 768
COMPUTER1
1
When you press INPUT on the projector, the INPUT list appears.
Press / to switch the INPUT mode.
•
6. Select the INPUT mode
BP. 29
7. Turn the computer on
Press STANDBY/ON on the projector or STANDBY on the remote control, and then press
the button again while the confi rmation message is displayed to put the projector into
standby mode.
On-screen display
On the
projector
On the remote
control
8. Turn the power off
BP. 26