Filter
Top Products
45
Useful
Features
Adjusting the Projector Function (“PRJ - ADJ” Menu)
Menu operation n Page 38
SEL./ADJ. ENTER END
Auto Power Off
System Sound
System Lock
h
On
On
Auto Restart On
STANDBY Mode Standard
0 min0Lamp Timer(Life) 100%
Speaker On
Audio Out VAO
Audio Input Audio 1
RS-232C 9600bps
Fan Mode Normal
Disable
Auto Sync On
Pict. SCR PRJ-ADJ Net. Help
1
2
3
4
5
7
6
8
9
0
1
Auto Sync (Auto Sync
Adjustment)
Selectable
items
Description
On Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Off Auto Sync adjustment is not
automatically performed.
Auto Sync adjustment is also performed by
pressing AUTO SYNC on the remote control.
The Auto Sync adjustment may take some
time to complete, depending on the image of
the computer connected to the projector.
When the optimum image cannot be achieved
with Auto Sync adjustment, use manual
adjustments. (See page
51.)
•
•
•
Note
2
Auto Power Off Function
Selectable
items
Description
On When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
Off The Auto Power Off function will be
disabled.
When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
•
Note
3
Auto Restart Function
Selectable
items
Description
On
If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
Off The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
4
STANDBY Mode
When set to “Eco”, power consumption is
reduced in standby mode.
Selectable
items
Description
Eco The monitor output and Network
functions are switched off in standby
mode.
Standard The monitor output and Network
functions are activated even if the
projector is in standby mode.
5
Setting the Confi rmation
Sound (System Sound)
Selectable
items
Description
On A confi rmation sound is made when
the projector turns on/off.
Off No confi rmation sound is made.