Sharp PN-L702B Computer Monitor User Manual


 
6
E
Properties
Settings for the touch pen can be congured in the properties. Select a tab to change a setting on that tab.
n
Double Click Range Setting (Single touch mode)
Set how much the position can shift between the rst touch and the second touch and still be recognized as a double-click. Set
the range based on how you use the touch pen. To return the setting to the default setting, click “Default”.
TIPS
Changing this setting also changes the effective double-click range when the mouse is used.
n
Double Click Speed Setting (Single touch mode)
Set the time that is recognized as a double-click. When a second touch occurs within the set time after the rst touch, it is
recognized as a double-click.
Speed Setting (Auto)
The inside of the frame can be touched twice (double-clicked) to set the speed automatically based on the interval between the
touches.
Set Manually
The speed can be set manually from “Slow” (about 1 second) to “Fast” (about 0.3 seconds).
Test
When the inside of the frame is double-clicked by touching it twice, the screen changes. If the screen does not change, repeat
the setting.
Default
Click to restore the default setting.
TIPS
Changing this setting also changes the mouse double-click speed of Windows.
Depending on the software application, changing the setting may not have any effect (for example, if the setting is set
separately in the application).
Touch Panel Settings