Filter
Top Products
20
MAKING COPIES
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with the
AUTO IMAGE ( ) key or manually with the PRESET RATIO selector
( , ) keys and/or the zoom ( , ) keys. The zoom function enables
precise copy ratio selection from 50% to 200% in 1% increments.
Reduction/enlargement/zoom
Automatic
1
Place the original in the document feeder tray or on the
original table.
2
When using the original table, press the ORIGINAL SIZE
ENTER ( ) key until the indicator for the size of the
original on the original table lights up.
3
Use the TRAY SELECT ( ) key to select the paper tray
with the desired paper size.
●
This feature will not work when copy paper of non-standard size is used
or the bypass tray is used.
4
Press the AUTO IMAGE ( ) key.
●
The copy ratio will be automatically set.
●
If the size and orientation of the original do not correspond to standard
reduction/enlargement ratios for the selected paper tray, then the
ORIGINAL SIZE indicator will blink.
●
If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
5
Enter the number of copies.
6
Press the START ( ) key.
●
To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE ( ) key again.
●
When copying from the SPF with this feature, the
automatic reduction/enlargement mode will be
automatically canceled after copying is complete.