Filter
Top Products
6
GETTING STARTED
Operation
panel
PART NAMES AND FUNCTIONS
Part names and functions
q Operation panel and keys for printer functions
See the printer manual.
w AUTO/MANUAL/PHOTO ( / / ) key
and indicators (p. 16)
Use to sequentially select the exposure modes: AUTO,
MANUAL ( ), or PHOTO ( ).
e ORIGINAL SIZE ENTER ( ) key and
indicators (p. 18, 20)
Use to input the original size.
r PAPER SIZE indicators
Light up to show the selected copy paper size.
t Alarm indicators
: Paper required indicator (p.13)
: Misfeed indicator (p.36)
: TD cartridge replacement required indicator
(p.32)
: Drum replacement required indicator (p.34)
y AUTO PAPER SELECT ( ) indicator
Paper of the proper size will be automatically selected
depending on the original size and selected copy ratio
when this indicator is on.
u SPF indicator (p. 16)
Lights up when originals are set in the document feeder
tray.
i Paper feed location/misfeed location indica-
tors (p. 36)
The selected paper feed location is shown by a lit
indicator ( ).
The general location of misfed paper is shown by a
blinking red indicator ( ).
o INTERRUPT key and indicator (p. 29)
Interrupts a copy run.
!0 PAPER SIZE ENTER ( ) key (p. 15)
Use to set the paper size in a tray.
!1 Copy quantity display
Displays the specified copy quantity during the ready
condition and displays the copy countdown as copies
are made. Also see items @2 and @4.
!2 CLEAR ALL ( ) key
Clears all selected settings and returns the copier to the
initial settings.
!3 POWER SAVE ( ) indicator (p. 44)
Lights up when the copier is in the preheat mode.
!4 XY-ZOOM ( ) key and indicator (p. 25)
Use to change the horizontal and vertical copy ratios
independently.
!5 B/W REVERSE ( ) key and indicator (p. 27)
Press to reverse the black and white areas.
GETTING STARTED
q w e r
t
y
i
u
!4
@0
!9
!8!7!6!5