Filter
Top Products
Connections and Setup
-19
To analog RGB
output terminal
5 RCA RGB cable
(Commercially available)
DVD player or
DTV* decoder
Connecting to RGB Video
Equipment Using a 5 RCA
RGB Cable (INPUT 1 or 2)
Use a 5 RCA RGB cable when connecting the
RGB video equipment such as DVD players and
DTV* decoders to INPUT 1 or 2 terminals.
*
DTV is the umbrella term used to describe the
new digital television system in the United States.
1 Connect a 5 RCA RGB cable to
the projector.
2 Connect the above cable to the
RGB video equipment.
Note
• When connecting the projector to the
video equipment in this way, select “RGB”
for “Signal Type” in the “Options” menu,
or select the RGB mode by pressing
on the remote control. See page 69.
• The (HD/C sync) and (VD) terminals may
be used depending on the specifications
of the DTV decoder connected to this pro-
jector. Please refer to the operation
manual of the DTV decoder for details.
To INPUT 1 or 2 terminals
Connecting to RGB Video
Equipment Using the DVI to
15-pin D-sub Adaptor and
the RGB Cable (INPUT 5)
1 Connect a DVI to 15-pin D-sub
adaptor to the projector.
2 Connect the above adaptor to
an RGB cable.
3 Connect the above cable to the
RGB video equipment.
• Secure the connectors by tightening the
thumbscrews.
Note
• When connecting the projector to the video
equipment in this way, select “A. RGB” for
“Signal Type” in the “Options” menu, or se-
lect the A. RGB mode by pressing
on
the remote control. See page 69.
Optional
accessory
DVI to 15-pin D-sub adaptor
Type: AN-A1DV (7.9" (20 cm))
RGB Cable
(commercially available)
To INPUT 5 terminal
To RGB output terminal
DVI to 15-pin D-sub adaptor
(sold separately)
DVD player or
DTV* decoder
XV_Z12000_E_US_p15_26.p65 03.9.29, 11:35 AM19