Sharp UX-B700 Fax Machine User Manual


 
Sending a Fax From Memory
52
Sending a Fax From Memory
You can scan a document into the faxs memory and send the document from
memory. This increases transmission speed and allows you to send a fax to
multiple destinations in a single operation. After transmission, the document is
automatically cleared from memory.
Note: If a power failure occurs while sending a fax from memory, you will need
to repeat the operation.
Broadcasting (sending a fax to multiple destinations)
This function allows you to send the same fax to as many as 20 different
destinations in just one operation.
When sending to multiple destinations, only auto-dial numbers can be used
to dial the numbers of the receiving machines.
1 Load the document(s).
If desired, press to set
the resolution and/or contrast.
2 Press .
3 Select a destination using one of the following methods:
Press a Rapid Key.
Press and enter a 2-digit Speed Dial number.
Press or until the name of the destination appears in the display
(if no name was stored, the number will appear).
RESOLUTION/
RECEPTION MODE
START/
MEMORY
SPEED DIAL
READY TO SEND