Sharp UX-B800 Fax Machine User Manual


 
Sending a Fax: Auto Dialling
30
5
Press .
6
Enter the name of the destination
(max. 20 characters).
For information on using the letter
keys, see page 6.
7
Press .
If you selected a Rapid Key or
Speed Dial number in Step 2, the
display will briefly show [STORED],
and then [NEW NUMBER]. Go to
Step 8.
If you did not select a Rapid Key or
Speed Dial number in Step 2, the
display will show the next available
Rapid Key or Speed Dial number. If
that number is acceptable, press
and go to Step 8. If not, press
the desired Rapid Key, or press
and enter the desired 2-digit
Speed Dial number, and go to Step
8.
8
Return to Step 2 to store another
number, or press to exit.
To confirm that an auto-dial number
has been stored correctly, print out
the Destination List as explained on
page 55.
SPEED DIAL
STOP
If a pause is required between any of
the digits to access a special service
or an outside line, press . The
pause appears as a hyphen (two
seconds per pause). Several pauses
can be entered in a row.
If you are on a Flash-type PBX and
are storing a number for an outside
line, press , press to insert
a pause, and then enter the fax or
voice number. (When you dial the
auto-dial number, you will
automatically dial out without the
need to press the key.)
If you are on a PBX that requires
dialling a number to dial out and are
storing a number for an outside line,
enter the number, press to
insert a pause, and then enter the
number of the receiving machine.
(When you dial the auto-dial number,
you will automatically dial out without
the need to dial the number for an
outside line.)
FUNCTION
R
FUNCTION
R
FUNCTION
all.book Page 30 Thursday, August 10, 2006 2:22 PM