Filter
Top Products
Setting Up and Using OpenLCR
32
1 Press once and once.
2 Press once and once.
3 Press
4 Enter a 2-digit number (“01” to “ 29”)
for the number of minutes of the
SHORT TIME setting. (If the number is
less than 10, enter a 0 before the
number.)
5 Enter a 2-digit number for the number
of minutes of the LONG TIME setting.
(The number must be greater than the
SHORT TIME setting and no more than
30.)
• Note: If the display shows NO
SERVICE, you must first download the
rate data.
6 Press to begin receiving the rate data for the new settings.
• Your fax calls OpenLCR and receives the data. This lasts one or two
minutes.
• Note: If you do not press to receive new data, the settings will
revert to their previous state.
FUNCTION
START/MEMORY
START/MEMOR
Y
Display:
The display briefly shows
your selection, then:
The display briefly shows
your selection. If the
settings were changed, it
will then show:
♦ When you change the SHORT TIME and/or LONG TIME setting, the fax
machine will automatically call OpenLCR and receive rate data for the new
times.
START: DOWNLOAD
LONG TIME
SHORT TIME
LCR SETTING
LCR TIME