Filter
Top Products
26
FULL SALES REPORT (X or Z REPORT)
• Use the reading function (X) when you need to take a reading of sales information entered since the last reset.
You can take this reading any number of times. It does not affect the register’s memory.
•
Use the resetting function (Z) when you need to clear the register’s memory. Resetting prints all sales information
and clears the entire memory except for the GT1 through GT3, reset count, and consecutive number.
X1 and Z1 reports: Daily sales reports
X2 and Z2 reports: Periodic (monthly) consolidation reports
When you take an X1 or X2 report, turn the mode switch to the X/Flash position, and use the corresponding key
sequence.
When you take an Z1 or Z2 report, turn the mode switch to the Z/PGM position, and use the corresponding key
sequence.
■
Daily full sales report (X1 or Z1 report)
Put the mode key in the mode switch and turn it to the X/Flash or the Z/PGM position.
Key operation
A
(For Z1 report: in the Z/PGM position)
Sample report
Subtotal percent
counter and total
“+” dept. counter
and total
Item percent
counter and total
Item void counter
and total
Void-mode transaction
counter and total
Subtotal void counter
and total
Received on account
counter and total
Paid total average per
customer
Grand total of plus
registration
Grand total of minus
registration
“-” dept. counter
and total
*2
Net sales total
Sales q’ty
Sales amount
Dept. code
Mode title*1
Reset counter
Net grand total (GT2-GT3)
Paid out counter and total
No-sales counter
Starting cash memory (+)
Starting cash memory (-)
Starting cash memory total
Customer counter
Paid total
Net total without tax
Tax total
Taxable 1 total
VAT 1 total
(To be continued on the next page)
*1: When you take X1 report, “X1” is printed.
*2: Printed in the Z1 report only.